Operation
BOMAG
28
BPR 35/40 D BPR 35/60 D
Fig. 27
l Keep moving throttle lever (Fig. 27) between
"MIN" and "MAX" throttle position.
l At the same time pull the vibratory plate by the
steering rod to the right and left, until it comes
free.
!
Danger
Danger of accident!
As a measure to avoid injury the machine must
only be guided from the side by the steering
handle
4.8 Shutting the engine down
!
Caution
Do not shut the engine down all of the sudden
from full speed, but let it idle for a while for
temperature equalization.
Fig. 28
l Shift the throttle lever to position "MIN" (Fig.
28) and let the engine run with idle speed for a
short while.
Vibration is shut down.
Fig. 29
l Set the throttle lever to position "STOP" (Fig.
29), the warning buzzer sounds.
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
