Bomag BPR 35/60 D - Yearly Maintenance: Hydraulic Oil

Maintenance every year
BOMAG 52 BPR 35/40 D BPR 35/60 D
For quality and quantity of oil refer to the table
of fuels and lubricants.
i
Note
The oil level must reach the bottom edge of the
bore .
l Turn the screw back in with a new seal ring.
5.21 Checking the hydraulic oil
level and topping up
Fig. 65
l Adjust the steering rod (Fig. 65) in upright po-
sition and lock it in the last locking position of
the detent rail.
Fig. 66
l Unscrew the plug (Fig. 66).
l Move the travel lever to reverse position and
hold it.
Go to Discount-Equipment.com to order your parts