06/054
1 General safety and application information
This documentation has been produced with the greatest of care and extensively and
repeatedly checked. For reasons of clarity, not all the detailed information on all types
of the product and also not every imaginable case of erection, operation or mainte-
nance have been taken into account. If you require further information or if specific
problems which are not dealt with extensively enou
gh in the documentation exist, you
can request the necessary information via the local representation of the company of
BONFIGLIOLI.
We would also point out that the contents of this documentation are not part of a
previous or existin
g agreement, assurance or legal relationship and are not intended
to amend the same. All obligations of the manufacturer result from the underlying
purchase contract, which also contains the complete and solely valid warranty regula-
tion. These contractual warranty provisions are neither extended nor limited by the
production of this documentation.
The manufacturer reserves the right to correct or amend the contents and the product
information as well as omissions without prior notification and assumes no kind of
liability for damage, injuries or expenditure to be put down to the aforementioned
reasons.
1.1 General information
Depending on their protection class, BONFIGLIOLI VECTRON frequency inverters can
have live, also moving parts as well as hot surfaces during operation.
In the event of inadmissible removal of the necessary covers, improper use, wron
g
installation or operation, there is the risk of serious damage to persons or property.
In order to avoid serious physical dama
ge or considerable damage to property, only
qualified trained personnel may carry out the work for transport, installation, commis-
sioning and maintenance. The norms EN 50178, IEC 60364 (Cenelec HD 384 or DIN
VDE 0100), IEC 60664-1 (Cenelec HD 625 or VDE 0110-1), BGV A2 (VBG 4) and na-
tional provisions are to be complied with. Qualified persons within the meanin
g of this
principal safety information are people acquainted with the erection, fitting, commis-
sioning and operating of frequency inverters or in possession of qualifications match-
ing their activities.
1.2 Proper use
The frequency inverters are electrical drive components intended for installation in
industrial plant or machines. Commissioning and start of intended operation are not
allowed until it has been established that the machine corresponds to the provisions of
the EC machine directive 98/37/EEC and EN 60204. According to the CE sign, the
frequency inverters additionally fulfill the requirements of the low-voltage directive
73/23/EEC and the norms EN 50178 / DIN VDE 0160 and EN 61800-2. Responsibility
for compliance with the EMC directive 89/336/EEC is with the user. Frequency invert-
ers are available in a limited way and as components exclusively intended for profes-
sional use within the meaning of the norm EN 61000-3-2.
With the issue of the UL test si
gn according to UL508c, the requirements of the CSA
Standard C22.2-No. 14-95 have also been fulfilled.
The technical data and the information on connection and ambient conditions can be
seen from the rating plate and the documentation and are to be complied with at all
costs.
To Next Page
Loading...
Need help?
General
