To Next PageTo Next Page
Need help?Do you have a question about the Bontrager GoTime and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Mounting | Handlebar |
| Battery Type | CR2032 |
| Water Resistance | Yes |
| Type | Wired |
| Wireless | No |
| Battery Life | Approximately 1 year |
| Functions | Current speed, trip distance, clock |
Warning against staring at the computer while riding to prevent accidents and loss of control.
Steps to get the GoTime computer operational, including sensor, battery, and preferences setup.
Lists required tools and all components included in the GoTime package for installation.
Detailed instructions for mounting the speed sensor on the fork and magnet on the spoke.
Procedure for inserting the battery into the GoTime computer before initial setup.
Guide to configuring units, tire size, and clock format (12/24 hour) upon first use.
Instructions on how to securely mount the GoTime computer onto the bicycle handlebar.
Explanation of different screens (Clock, Timer, Trip, Odometer, Speed) and how to cycle through them.
How to initiate a ride and reset trip data (distance, time, speed) to zero.
Steps to modify the pre-set tire size or enter a custom size for accurate distance measurement.
Procedure to manually change the total distance recorded by the odometer.
Instructions for adjusting the clock display, including time format and current hour/minute.
How to perform a factory reset, erasing all stored data and returning the device to default settings.
A reference table listing various tire sizes and their corresponding numerical codes for computer setup.
Method for accurately measuring the circumference of your wheel for custom tire size input.
Step-by-step guide to inputting the measured wheel circumference or code into the GoTime computer.
