BorMann BBS2100 - Safety Precautions

4
WWW.NIKOLAOUTOOLS.GR WWW.NIKOLAOUTOOLS.GR
EN EN
INTRODUCTION
Read the operang instrucons carefully and thoroughly before assembling and operang the device. The operang instrucons are intended to help the user
become familiar with the tool and take advantage of its applicaon possibilies in accordance with all recommendaons. Read the instrucon manual each
me before operang the machine and carefully follow all informaon.
The instrucon manual forms part of this device. Keep the operang instrucons manual with the machine at all mes and store it in a plasc cover to protect
it from dirt and moisture. Make sure to hand over all associated documents in the event that the device is passed on to another user.
The machine can only be operated by persons who were instructed concerning the operaon of the machine and who are informed about the associated
dangers.
SYMBOLS
Observe the operang instrucons.
Use a mask.Use hearing protecon. Use eye protecon.Cauon!
Remove the mains plug before carrying
out any adjustments, maintenance or
repair work.
Electrical devices must not be
disposed of with domesc waste.
SAFETY PRECAUTIONS
Note: The term "power tool" in the warnings refers to your mains-operated (corded) power tool or baery-operated (cordless) power tool.
General safety instrucons
• Keep your work area dy. An undy workplace can lead to accidents.
• Consider environment inuences. Do not expose power tools to rain. Do not use power tools in damp or wet surroundings.
• Ensure the work area is adequately lit.
• Do not use power tools where there is a re or explosion hazard.
• Protect yourself against electric shock. Avoid body contact with earthed parts (e.g. pipes, radiators, electric cookers, refrigerators).
• Keep other people away. Do not allow other people, especially children, to touch the power tool or cable. Keep them away from your work area.
• Store unused power tools safely. Unused power tools should be stored in a dry, high or locked place, out of the reach of children.
• Do not overload your power tool. They work beer and more safely within the specied power range.
• Use the correct power tool. Do not use low-performance machines for heavy work. Do not use the power tool for purposes for which it is not intended. For
example, do not use a circular hand saw for cung tree branches or logs.
• Wear suitable work clothing. Do not wear loose clothing or jewellery that might become caught in moving parts. When working outdoors, non-slip footwear
is recommended. Wear a hair net to contain long hair.
• Use protecve equipment. Wear safety goggles. Use a dust mask for work which generates dust.
• Connect a dust extracon device. If connecons are available for dust extracon and collecon devices, make sure that these are connected and properly
used.
• Do not use the cable for purposes for which it is not intended. Do not use the cable to pull the plug from the socket. Protect the cable from heat, oil and sharp
edges. Damaged or undy cables increase the risk of electric shock.
• Secure the workpiece. Use jigs or a vice to hold the workpiece securely. This is safer than using your hand.
• Avoid abnormal body postures. Ensure secure foong and keep your balance at all mes.
• Maintain tools with care. Keep cung tools sharp and clean for beer and safer working. Follow the instrucons for lubricaon and changing tools. Regularly
check the connecon cable of the power tool and, if it is damaged, have it replaced by a qualied specialist. Check extension cords periodically and replace
them if they are damaged. Keep handles dry, clean and free from oil and grease. Remove the plug from the mains outlet. When the power tool is not in use,
before maintenance and when changing tools such as the saw blade, drill bit, milling cuer.
• Do not allow any tool keys to remain inserted. Check, before switching on, that keys and adjusng tools have been removed.
• Avoid unintenonal starng. Make sure that the switch is o when inserng the plug into the outlet.
• Use extension cables outdoors. Only use approved and appropriately marked extension cables outdoors.
• Pay aenon at all mes. Be aware of what you are doing and take the utmost care when working. Do not use the power tool if you cannot concentrate.
• Check the power tool for possible damage. Before further use of the power tool, safety devices or slightly damaged parts must be carefully examined in
respect of their proper and intended funcon.
WARNING! Read all safety warnings, instrucons, illustraons and specicaons provided with this power tool. Failure to follow all instrucons
listed below may result in electric shock, re and/or serious injury. Save all warnings and instrucons for future reference.