Bosch 502801T - User Manual

Questions and Answers

A
Amanda RobertsSep 3, 2025
What to do if water drips out of the soleplate of my Bosch 502801T Iron?
- B
  brandon86Sep 3, 2025
  Water dripping from the soleplate of your Bosch Iron along with steam can occur for several reasons: the temperature control setting might be too low, the steam control might be set too high in conjunction with a low temperature, you may be pressing the shot of steam button repeatedly without waiting 5 seconds between each press, or pure distilled water (or other products like fragrant water) may have been added to the tank.
J
Joseph Chambers Jr.Sep 18, 2025
What to do if 'Auto off' indicator lamp lashes on my Bosch Iron?
- E
  Edward JacksonSep 18, 2025
  If the 'Auto off' indicator lamp is flashing on your Bosch Iron, it means the 'secure' system has been activated. To reconnect the iron, simply move it about gently.
E
Ebony GarciaSep 16, 2025
How to prevent clothes from sticking to my Bosch 502801T Iron?
- E
  ebaileySep 16, 2025
  If clothes stick to your Bosch Iron, it's likely that the temperature is too high. Turn the temperature control down and wait for the iron to cool down before continuing.
M
Mark HansenSep 14, 2025
Why does my Bosch 502801T Iron smoke when I use it for the first time?
- K
  kochadamSep 14, 2025
  If smoke comes out when you connect your Bosch Iron for the first time, this is normal and will stop after a few minutes.
D
Danielle DavenportSep 12, 2025
What does it mean when the “Auto off” indicator lamp flashes on my Bosch Iron?
- R
  Richard HaynesSep 12, 2025
  If the “Auto off” indicator lamp flashes on your Bosch Iron, it means that the 'secure' system has been activated. To reconnect the iron, just move it about gently.
B
Brianna SingletonSep 12, 2025
Why do clothes stick to my Bosch 502801T Iron?
- J
  Juan ForbesSep 12, 2025
  If clothes stick to your Bosch Iron, the temperature is likely too high. Turn the temperature control down and wait for the iron to cool.
A
alexander75Sep 9, 2025
What to do if Bosch 502801T Iron has excessive dripping?
- P
  pamelasolisSep 9, 2025
  If you experience excessive dripping or steaming from your Bosch Iron, it might be due to the 'Calc’nClean' system not being properly closed. Try actuating the 'clean' button a few times.
S
Sandra WagnerSep 7, 2025
What to do if Bosch 502801T drips water?
- M
  Michael BrownSep 7, 2025
  If water drips out of the soleplate of your Bosch Iron with steam, it could be due to several reasons. The temperature control might be set too low; try increasing it to between “••” and “max” and wait for the light to go out. Alternatively, the steam regulator could be set too high for the current temperature; try lowering it. Finally, avoid pressing the shot of steam button repeatedly without waiting 5 seconds between each press.
C
carla53Sep 5, 2025
Why are deposits coming out of my Bosch 502801T Iron?
- A
  Alicia BoydSep 5, 2025
  If deposits are coming out through the holes in the soleplate of your Bosch Iron, it indicates that traces of lime scale are coming out of the steam chamber. Perform a cleaning cycle.
Y
Yvonne CookAug 20, 2025
Why is my Bosch 502801T not heating up?
- N
  nathanielwallAug 21, 2025
  If your Bosch Iron isn't heating up, there are several possible reasons. First, ensure the temperature control isn't set to the minimum; if it is, turn it to a higher setting. Second, check that the iron is properly connected to a working power outlet by testing the outlet with another appliance. Finally, the 'secure' system might have been activated; try gently moving the iron to reconnect it.