Controls | 41
6 720 813 643 (2018/04)
PF Bypass Activation
To Enable or Disable bypass function.
▶ Touch the symbol .
Display shows following menu.
– Off
– On
The current selection is in green color.
▶ Touch symbols or to select the desired option.
▶ Touch the symbol .
▶ Touch the symbol to return to main menu.
RS Recirculation Settings
To define recirculation comfort level,
▶ Touch the symbol .
▶ Touch symbols or to define comfort level.
– 1
– 2
– ...
– 9
Choosing a higher comfort level (9) will set the recirculation water temperature
closer to the set point defined on the water heater. Choosing a lower value (1) will
favor efficiency at the expense of recirculation temperature comfort.
▶ Touch the symbol .
▶ Touch the symbol to return to main menu.
IC - ICC
Default setting is On.
▶
Only a qualified technician can change this parameter.
To Next Page
