Technical Data
Mechanical Data
Hydraulic unit with attached ECU
Serial housing, dust‐ and damp‐proof
Vibration damped circuit board
38 pin connector
2 hydraulic valves per wheel
2 brake circuits (front and rear)
2 hydraulic high pressures pumps
2 hydraulic accumulators 3 cm
3
/each
Standard fittings 2 x master cylinders M12 x 1
4 x brake cylinders M10 x 1
Size 125 x 80.3 x 129.6 mm
Weight about 1,850 g
Operating temperature ‐30 to 130°C
Max. shock 50 g less than 6 ms
Electrical Data
Supply voltage 8 to 16 V, max. 26 V for 5 min
Max. peak voltage 35 V for 200 ms
Power consumption 8 W stand‐by, 230 W in operation
Inputs
4 active wheel speed DF11
Brake pressure (front brake circuit)
Longitudinal acceleration, lateral acceleration, yaw rate
9 adjustment settings applicable for OEMSs (Pos. 1‐9)
2 adjustment settings applicable for Temas (Pos. 10 and 11)
ABS function can be deactivated (Pos. 12)
Brake light switch
Outputs
ABS warning light (MIL)
Communication
CAN interface
Content of Kit and Weights
Hydraulic unit with attached ECU About 1,850 g
Pressure sensor About 40 g
Yaw/acceleration sensor About 60 g
3
Technical Data | 3
Bosch Motorsport ABS M4 Manual 9 / 54
To Next Page
Loading...
