EasyManua.ls Logo

Bosch ADS 325 - Page 5

Bosch ADS 325
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
582819 | REV. A | 07.2018
Bosch Automotive Service Solutions Inc
ADS 325
|
User Manual
|
3
|
en
handset product with the supplied
charger. Other types of batteries may
burst causing injury to persons and
property damage.
Use of an attachment not
recommended or sold by the battery
charger manufacturer may result in
fire, electric shock, or personal injury.
Do not operate the tool with a
damaged cord or connector. Replace
damaged cords and connectors
immediately.
Do not operate the charger if it has
received a sharp blow, been dropped,
or otherwise damaged in any way.
Take the charger to a qualified service
person.
Do not disassemble the charger.
Take the charger to a qualified
service person if service or repair
is necessary. Incorrect reassembly
may result in electric shock or fire.
Unplug charger before attempting any
maintenance or cleaning. Turning off
controls will not reduce this risk.
To prevent possible hearing damage,
avoid using the tool at high volume
levels for long periods.
Do not expose tool or charger to rain,
moisture, or snow.
Verify that cords are located where
they will not be stepped on, tripped
over, or otherwise become a safety
hazard or subjected to damage or
stress.
Use only batteries that are approved
for use with this tool. Use of other
types may increase the risk of fire or
explosion.
Do not carry a battery in your pocket,
purse, or other container where metal
objects (such as car keys or paper
clips) could short-circuit the battery
terminals. The resulting excessive
current flow can cause extremely
high temperatures and may result in
damage to the battery pack or cause
fire or burns.
The battery poses a burn hazard
if you handle it improperly. Do not
disassemble it. Handle a damaged or
leaking battery with extreme care. If
the battery is damaged, electrolyte
may leak from the cells and may cause
personal injury.
Keep the battery away from children.
Do not store or leave your tool or
battery near a heat source such as
a radiator, fireplace, stove, electric
heater, or other heat-generating
appliance or otherwise expose it to
temperatures in excess of 140 ºF
(60ºC). When heated to excessive
temperatures, battery cells could
explode or vent, posing a risk of fire.
Do not dispose of your tool’s battery
in a fire or with normal household
waste. Battery cells may explode.
Discard a used battery according to
the manufacturer’s instructions or
contact your local waste disposal
agency for disposal instructions.
Dispose of a spent or damaged
battery promptly.
IMPORTANT:
To avoid damage or generation of false
data, make sure the vehicle battery is fully
charged and the connection to the vehicle
Data Link Connector (DLC) is clean and
secure.
Do not place the tool on the distributor
of a vehicle. Strong electromagnetic
interference can damage the tool.
Never disconnect or reconnect any
electrical connector while the ignition is on.
Powertrain Control Module (PCM) damage
may result.

Related product manuals