Figure 7.17: Customer Information – Creating a new customer
There are two methods how to connect:
Automatic dialing connection:
1. Select the Link index sheet.
2. Select the communication model Modem Connect.
3. Click on the Connect button.
P The computer is connected to the AMAX panel.
Manual dialing connection:
1. Select the Link index sheet.
2. Select the communication model Modem Connect.
3. Click on the Wait for Incoming Call button.
4. Initiate callback call from the AMAX panel via the keypad: Enter the subscriber number
and press [5] [7] + [#].
P The computer is connected to the AMAX panel.
AMAX panel
Configuration | en 105
Bosch Sicherheitssysteme GmbH Installation Manual 2015.05 | 06 | F.01U.309.277
To Next Page
Loading...
