To Next PageTo Next PageWhat to do if my Bosch AQT 40-13 motor starts up but with restricted or no working pressure?
If your Bosch Pressure Washer starts but provides restricted or no working pressure, first ensure that a water supply is connected. If it is connected, the water filter could be clogged up, so clean the water filter. Also, the nozzle might be clogged; clean the nozzle.
Why does my Bosch AQT 40-13 Pressure Washer motor sound like it's starting but fails?
If your Bosch Pressure Washer motor sounds like it's starting but doesn't, there might be an insufficient power supply. Ensure the voltage of the mains power supply line matches what's on the plate. Voltage loss due to an extension cable could also be the issue; check the extension cable's characteristics.
What to do if my Bosch AQT 40-13 Pressure Washer motor starts but there is no pressure?
If your Bosch Pressure Washer motor starts but there's no pressure, the nozzle may be partially blocked. Try cleaning the nozzle.
What to do if my Bosch AQT 40-13 Pressure Washer pressure is pulsating?
Pulsating pressure in your Bosch Pressure Washer can be due to several reasons. First, air might be trapped in the inlet water supply; run the pressure washer with the spray handle open at low pressure until it stabilizes. Check that your water supply meets the specifications, with a minimum hose diameter of 1/2" or 13 mm. Clean the water filter if it's blocked. Ensure water supply hoses aren't squeezed. If you're using a high-pressure extension hose, remove it and retry, as the maximum length is 7 m.
What causes my Bosch Pressure Washer motor to stop?
If your Bosch Pressure Washer motor stops, it could be due to: * A faulty or blown fuse. Replace the fuse. * An incorrect mains voltage. Check that the mains voltage matches the specifications on the model tag. * The motor protector activating. Allow the unit to cool for 15 minutes.
What to do if my Bosch AQT 40-13 motor starts but has no pressure?
If your Bosch Pressure Washer motor starts but there's restricted or no working pressure, try the following: * Connect the water supply. * Clean the water filter, as it might be clogged. * Clean the nozzle, as it might also be clogged.
Why won't my Bosch AQT 40-13 Pressure Washer motor start?
Several factors could prevent your Bosch Pressure Washer motor from starting. Ensure the plug is properly connected to a working mains socket. Check the fuse and replace it if necessary. If you're using an extension cable, try without it, as the cable might be damaged. The motor protector may have activated, in which case, allow the unit to cool for 15 minutes. Lastly, check for freezing in the pump, water supply hose or accessory; allow them to thaw if frozen.
Why does my Bosch AQT 40-13 motor keep stopping?
If your Bosch Pressure Washer motor stops unexpectedly, check the fuse and replace it if faulty. Ensure that the mains voltage matches the specifications on the model tag. Also, the motor protector may have activated; allow the unit to cool down for 15 minutes.
General| Wash brush | - |
|---|---|
| Rotating nozzle | Yes |
| Form factor | Compact |
| Hose length | 6 m |
| Cable length | 5 m |
| Power source | Electric |
| Maximum flow rate | 400 l/h |
| Minimum flow rate | - l/h |
| Working pressure (max) | 130 bar |
| Working pressure (min) | - bar |
| Maximum input water temperature | 40 °C |
| Power consumption (typical) | 1900 W |
Provides explanations for symbols used in safety instructions and on the device.
Covers fundamental safety warnings and crucial precautions for operating the pressure washer.
Details essential electrical safety requirements and recommendations for connecting the appliance.
Specifies necessary precautions and standards for connecting the pressure washer to a water supply.
Outlines critical instructions and warnings for the safe and effective use of the pressure washer.
Details safety measures and operator responsibilities during the use of the pressure washer.
Covers safe procedures for transporting the unit and performing routine maintenance.
Information on approved accessories, spare parts, and the product's designated usage.
Presents measured sound emission and vibration values according to relevant standards.
Lists key actions for mounting and operating the unit with corresponding figure and page references.
Details the steps for starting the pressure washer and important safety warnings related to power supply.
Provides general tips and precautions for operating the pressure washer safely and effectively.
Explains the correct use of cleaning agents and the recommended cleaning method.
Guides on connecting the pressure washer to water tanks or natural sources for operation.
Lists common problems, their possible causes, and corrective actions for the pressure washer.
Details regular checks and maintenance tasks to ensure the longevity of the pressure washer.
Provides guidance on proper cleaning, draining, and storing the unit after use.
Information on contacting Bosch for spare parts, servicing, and application support.
Guidelines for protecting the environment and proper disposal of the product and its accessories.
