2. Press [ENTER] to configure the user’s name.
3. The [ESC] key acts as a backspace key. Press [ESC] to delete
the characters. Press a number key repeatedly to scroll
through the number and letters shown on the key. To enter a
space, press [0][0]. To enter a space, press [0][0]. To
capitalize a letter, press [CMD] before you enter the letter.
For caps lock, press [CMD][CMD]. To remove caps lock,
press [CMD][CMD][CMD].
4. Press [ENTER] to save the new name. The keypad returns to
the previous menu.
Configuring the user’s level:
1. Use [NEXT] to go to the Configure Level option, and press
[ENTER], or simply press [3].
2. Press [ENTER] to change the default authority level for area
1.
3. Enter the authority level number (1 – 14) you wish to apply to
the user and press [ENTER]. The keypad shows Level
configured and returns to the previous menu.
4. If your security system has more than one area, use [NEXT]
and the previous two steps to set the levels for the additional
areas.
182 en | B92x/B91x Users menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.
To Next Page
Loading...
