Configuring a RADION keyfob or an Inovonics Transmitter for the
user:
1. Use [NEXT] to go to the Configure Keyfob option, and press
[ENTER], or simply press [4].
2. Press [ENTER] to continue.
3. To manually enter the RFID, if desired, press [1] or [ENTER]
to open the RFID option. Otherwise, the keypad automatically
learns the RFID into the security system when you add a
RADION keyfob or an Inovonics Transmitter.
4. Press [ENTER] to continue.
5. Enter the RFID.
6. Press [ENTER] to save the RFID and return to the previous
menu.
7. Use [NEXT] to go to the Add a Keyfob option, and press
[ENTER] or simply press [2].
8. Press [ENTER] to continue.
9. On a RADION keyfob, press any button on the keyfob.
On an
Inovonics Transmitter, open the transmitter and press the
RESET button, per the manufacturer’s instructions. The
keypad shows Keyfob enrolled and returns to the previous
menu.
10. If you need to replace the keyfob or transmitter you just
added (for example, you accidentally added the wrong one),
use [NEXT] to go to the Replace a Keyfob option, and press
[ENTER],or simply press [3], and then follow the previous
step.
Control Panels
B92x/B91x Users menu | en 183
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
