Bosch BRC3600 - Intended Use of LED Remote; LED Remote Technical Specifications

English – 8
Intended use
The LED Remoteoperating unit is intended for con-
trolling an eBike/on-board computer from the system
generation the smart system. You can also use it to
change the assistance level in the eBike Flowapp.
In order to be able to use the control unit to its fullest
extent, a compatible smartphone with the eBike
Flowapp is required.
You can connect the LED Remoteoperating unit with
your smartphone via Bluetooth®.
Depending on the operating system of the
smartphone, the eBike Flow app can be
downloaded free of charge from the Apple
App Store or Google Play Store.
Scan the code with your smartphone to download the
eBike Flow app.
Technical data
Control unit LED Remote
Product code BRC3600
Max. charging current of USB
port
A)
mA 600
USB port charging voltage
A)
V 5
USB charging cable
B)
USB Type-C®
C)
Charging temperature °F 32 to 113
Operating temperature °F 23 to 104
Storage temperature °F 50 to 104
Diagnostic interface USB Type-C®
C)
Internal lithium-ion battery V
mAh
3.7
75
Protection rating IP55
Dimensions (without fasten-
ing)
mm 74 × 53 × 35
Weight oz 1
Bluetooth® Low Energy 5.0
– Frequency MHz 2400–2480
– Transmission power mW 1
A)
Information for charging the LED Remoteoperating unit;
external devices cannot be charged.
B) Not included with the product as standard
C) USB Type-C® and USB-C® are trademarks of USB Imple-
menters Forum.
The license information for the product is available at the follow-
ing Internet address: www.bosch-ebike.com/licences
0 275 U07 3RL | (08.03.2023) Bosch eBike Systems