EasyManua.ls Logo

Bosch Bulls Cross Lite Evo - Nameplate

Bosch Bulls Cross Lite Evo
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MY20B01-22_1.0_21.06.2019
11
About these operating instructions
1.9 Nameplate
The nameplate is situated on the frame. You will
find the precise position of the nameplate in
Figure 2. You will find thirteen pieces of
information on the nameplate.
Figure 1: Nameplate, example
No. Designation Description
1 CE marking The manufacturer uses the CE marking to declare that the pedelec complies with
applicable requirements.
2 Manufacturer's contact details You can contact the manufacturer at this address. You can find more information in
Section 1.1.
3 Type number All pedelec models have an eight-digit type number, which is used to specify the design
model year, the type of pedelec and the version. You can find further information in
Section 1.9.1.
4 Maximum continuous power The maximum continuous power is the maximum power for the electric motor output shaft
during 30 minutes.
5 Permitted total weight The permitted total weight is the weight of the fully assembled pedelec with the rider and
baggage.
6 Year of manufacture The year of manufacture is the year in which the pedelec was manufactured. The
production period is from August 2019 to July 2020.
7 Pedelec type You can find further information in Section 1.9.3.
8 Safety markings You can find more information in Section 2.6.
9 Disposal instructions You can find more information in Section 9.
10 Area of use You can find further information in Section 1.9.4.
11 Model year The model year refers to the first production year that the series-manufactured pedelec
was produced in the version and is not always identical with the year of manufacture.
The year of manufacture may be before the model year in some cases. If no technical
modifications are introduced to the series, production may continue of pedelecs from a
previous model year.
12 Weight of the ready-to-ride pedelec The indicated weight for a ready-to-ride pedelec refers to the weight of a pedelec at the
time of sale. The weight of each additional accessory must be added to this weight.
13 Shut-off speed Speed reached by the pedelec at the moment when the current has dropped to zero or to
the no load current value.
ZEG Zweirad-Einkaufs-
Genossenschaft eG
Longericher Str. 2
50739 Köln, Germany
Typ:
20-16-0001
EN 15194
0,25 kW / 25 km/h
zGG 180 kg
EPAC 25 kg
BJ 2019 / MJ 2020
nach
EPAC
2
3
1
4
5
6
7
8
9
12
13
10
11

Table of Contents

Related product manuals