Bosch Bulls Cross Lite Evo - Installing the Wheel with Screw-On Axle (15 MM); Installing the Wheel with Screw-On Axle (20 MM); Installing the Wheel with Screw-On Axle; (20 MM)

MY20B01-22_1.0_21.06.2019
44
Assembly
 Tighten the axle with a 5 mm hexagon socket
spanner to 8–10 Nm.
Figure 27: Tightening the axle
 Insert the securing screw on the non-drive
side.
Figure 28: Pushing the quick release lever into the axle
 Tighten the securing screw with a 5 mm
hexagon socket spanner to 5–6 Nm.
 The lever is mounted.
Figure 29: Tightening the securing screw
5.3.2.2 Installing the wheel with screw-on axle
(20 mm)
 Insert the axle completely on the drive side.
Figure 30: Tightening the inserted axle
 Tighten the securing clip with a 4 mm hexagon
socket spanner to 7 Nm.
Figure 31: Tightening the axle