MY20B01-22_1.0_21.06.2019
79
Operation
You can use the Browse back button (2) and the
Browse forwards button (3) to access the
different user interfaces with information on riding
values even when riding. This means both hands
can remain on the handlebars while you are
cycling.
You can use the plus button (4) and the minus
button (6) to increase or decrease the levels of
assistance. If you are accessing a list (such as the
SETTINGS menu), you can use the buttons to
scroll up and down the list.
You can use the select button (1) to perform the
following functions:
- Gain access to the QUICK MENU while riding.
- Open the SETTINGS MENU in the STATUS
SCREEN while the bicycle is stationary.
- Confirm values and accept information
notifications.
- Exit a dialogue.
6.10.12 Opening the start screen
Insert the display into its mount.
The START SCREEN will open.
6.10.13 Opening the status screen
Open the START SCREEN.
Press the Browse back button.
The STATUS SCREEN will open.
6.10.14 Opening the settings
Open the STATUS SCREEN.
Select SETTINGS in the lower section.
Press the select button.
The SETTINGS will open.
6.10.15 Changing the settings
You will find a detailed description of the
individual parameters in the online operating
instructions at:
www.Bosch-eBike.com/Kiox-manual.
6.10.16 Opening the quick menu
You can use the QUICK MENU to display
selected settings which can also be adjusted while
you are riding.
You cannot access them from the ST ATUS
SCREEN.
Press the select button (1).
The QUICK MENU will open
You can make the following settings on the quick
menu:
6.10.16.1 Resetting the journey data
Open the QUICK MENU.
Select Rest.
Press the select button (1) to confirm.
Enter the date.
All data are reset to zero for the trip distance up
until this point.
6.10.16.2 Changing the start gear
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears
Press the Info button (display) and the RESET
button together.
CONFIGURATION is displayed on the
display. The System settings is opened.
Press the Info button (display) repeatedly until
MY E-BIKE is displayed.
Press the Info button (display) and the RESET
button together.
The My e-bike menu is open.
Press the info button (display) repeatedly until
ESHIFT is displayed.
The My eShift menu is open.
Press the info button (display) button
repeatedly until SET START GEAR is
displayed.
Symbol Designation
1 < Browse back button
2 Select button
3 > Browse forwards button
4 + Plus button
5 Push assist button
6 – Minus button
Table 49: Overview of the control panel
To Next Page
Loading...
