Bosch Bulls Cross Lite Evo - Checking the Belt and Chain Tension; Replacing the Lighting

MY20B01-22_1.0_21.06.2019
7
Contents
7.3.1 Servicing the frame 92
7.3.2 Servicing the stem 92
7.3.3 Servicing the fork 92
7.3.4 Servicing the drive elements 92
7.3.5 Servicing the pedals 92
7.3.6 Servicing the chain 92
7.3.7 Servicing the drive elements 92
7.4 Maintenance 93
7.4.1 Wheel 93
7.4.2 Checking the tyres 93
7.4.3 Checking the rims 93
7.4.4 Check and correct tyre pressure 93
7.4.4.1 Dunlop valve 93
7.4.4.2 Presta valve 94
7.4.4.3 Schrader valve 94
7.4.5 Brake system 94
7.4.6 Checking the brake linings for wear 94
7.4.7 Checking the pressure point 94
7.4.8 Checking the brake discs for wear 95
7.4.9 Electrical cables and brake cables 95
7.4.10 Gear shift 95
7.4.11 Stem 95
7.4.12 USB port 95
7.4.13 Checking the belt and chain tension 95
7.4.14 Checking the handlebar grip position 95
8 Maintenance 96
8.1 Axle with quick release 97
8.1.1 Checking the quick release 97
8.2 Adjusting the gear shift 97
8.2.1 Cable-operated gear shift, single-cable 98
8.2.2 Cable-operated gear shift, dual-cable 98
8.2.3 Cable-operated twist grip, dual-cable 98
9 Troubleshooting, fault clearance
and repair 99
9.1 Troubleshooting and fault clearance 99
9.1.1 The drive system or display do not
start up 99
9.1.2 Error messages 99
9.2 Repair 100
9.2.1 Use original parts and lubricants only 100
9.2.2 Replacing the lighting 100
9.2.3 Setting the headlight 100
10 Recycling and disposal 101
11 Documents 102
11.1 Parts list 102
11.2 Assembly report 103
11.3 Maintenance log 105
11.4 Charger operating instructions 108
12 Keyword index 117
13 Glossary 118
Appendix 121
I. Translation of the original EC
declaration of conformity 121