MY20B01-22_1.0_21.06.2019
65
Operation
Determine your rebound setting based on the
air pressure. Turn the rebound adjuster back
anti-clockwise by the number of clicks
specified in the table below:
6.3.9 Retracting the brake linings
Disc brakes require wearing-in time. The braking
force increases over time. You therefore need to
be aware that the braking force may increase
during the wearing-in period. The same happens
after brake pads or discs are replaced.
Accelerate pedelec to about 25 km/h.
Brake pedelec until it comes to a halt.
Repeat process 30–50 times.
The brake linings and brake discs are now
retracted and provide optimal braking power.
Air pressure (psi) Recommended rebound setting
< 100 Open (anti-clockwise)
100 - 120 11
120 - 140 10
140 - 160 9
160 - 180 8
180 - 200 7
200 - 220 6
220 - 240 5
240 - 260 4
260 - 280 3
280 - 300 2
Table 47: Filling pressure table for the FOX air fork
To Next Page
Loading...
