MY20B01-22_1.0_21.06.2019
26
Overview
Figure 19: Overview of the structure and operating
elements of the display
3.1.6.1 USB port
There is a USB port underneath the rubber cover
below the display.
The USB connection can be used to operate or
charge most devices which can be recharged via
USB, such as different mobile telephones. The
display and a sufficiently charged battery must be
in use on the pedelec to charge devices.
3.1.7 Riding light
When the riding light is activated, the headlight
and the rear light are switched on together.
3.1.8 Charger
Each pedelec is supplied with a charger. As a
general rule, any BOSCH charger may be used:
• The 2A compact charger
• The 4A standard charger
• The 6A fast charger
Observe the operating instructions in the section
on Documents.
Symbol Use
1 Riding light button
2 Screen display
3 On-Off button (display)
4 USB port protective flap
Table 10: Operating elements overview
Charge voltage 5 V
Charging current Max. 1000 mA
Table 11: USB port technical data
To Next Page
Loading...
