Bosch C 60 - Page 103

103
C 60 Online Measurement
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Motorsport
C 60 Online Measurement + Calibration
 C 60 Configuration
 System configuration (channel + display configuration, CAN I/O, PWM Out, etc.) is
stored in the C 60
 Use RaceCon to create and download configuration from the PC to C 60
 Communication interface: Ethernet
 Communication protocol: XCP
 Online Measurement + Calibration
 System status and diagnosis
 Check and calibrate sensors in the vehicle
 Live display of sensor values on the PC
 Use RaceCon for diagnosis, online measurement and calibration
 Communication interface: Ethernet
 Communication protocol: XCP