Need help?Do you have a question about the Bosch C 80 and is the answer not in the manual?
General| Resolution | 16 bit |
|---|---|
| Interfaces | USB |
| Measurement Range | ±10V |
| Accuracy | ±0.1 % FS |
| Channels | 8 universal analog inputs (±10 V, ±20 mA, Pt100, Pt1000, Thermocouples type K, S, J, T, N, R, B, E), 4 digital inputs (trigger, counter, frequency), 2 digital outputs (24 V / 500 mA) |
Connect the C 80 data logger to your computer using MSA-Box or Ethernet.
Configure a new project within the RaceCon software interface.
Create mathematical operations on measurement channels.
Implement logic-based functions with conditions.
Configure channels to receive data from CAN buses.
Configure channels to transmit data onto CAN buses.
Configure analog input channels for voltage signals.
Set up sensors and their input properties.
Configure measurement sheets for real-time sensor data display.
Perform real-time offset calibration for sensors.
Calibrate multipoint adjustment channels in real-time.
Overview of the data recording capabilities and options.
Set up and configure data recording parameters.
Set up lap triggers for time measurement and data logging control.
Process for updating the device's firmware.
Configure fuel consumption calculation and tank monitoring.
To Next Page
