Bosch C 80 - Predated Laptime

17 | Lap Trigger
122/144 Manual_C_80 Bosch Motorsport
Following signals are assigned to the function:
Laptrigger_trackdet_id Signal will show the track name from the
Racetracks list as an enumeration or can
show the ID number as raw value. The enu-
merated name will also be visible in the log-
ging.
Laptrigger_trackdet_laplen Track length of the used track variant
Laptrigger_trackdet_lat Latitude GPS coordinate of the used GPS
trigger point
Laptrigger_trackdet_long Longitude GPS coordinate of the used GPS
trigger point
17.7 Predated Laptime
The predated laptime function allows to compare the current lap- and segment time with
the predated time of an expected lap. Additional the function can estimate the laptime of
the current lap. This functionality is integrated in the laptrigger module in RaceCon.
17.7.1 Setting up the predated laptime
To use the predated laptime function you need to set up a laptrigger as described in the
chapter Lap Trigger [}109]. Under the ribbon “Segment timing” you need to choose your
segmentation mode which can either be distance or intermediate trigger based.