Bosch C 80 User Manual

1 | Preparation
4/144 Manual_C_80 Bosch Motorsport
1 Preparation
Use the C 80 only as intended in this manual. Any maintenance or repair must be per-
formed by authorized and qualified personnel approved by Bosch Motorsport.
Operation of the C 80 is only certified with the combinations and accessories that are spe-
cified in this manual. The use of variant combinations, accessories and other devices out-
side the scope of this manual are only permitted when they have been determined to be
compliant from a performance and safety standpoint by a representative from Bosch
Motorsport.
Read the manual carefully and follow the application hints step by step. Do not hesitate to
contact us, contact data can be found on the last page of this document.
Important information on Electromagnetic Conformity
To avoid unwanted interference with the environment (people, animals, electronic devices)
or unwanted harm to the environment, it is mandatory that the user of the C 80 carries
out an appropriate analysis to determine the electromagnetic interaction the C 80 may
have with its individual installation environment.
Disclaimer
Due to continuous enhancements, we reserve the rights to change any illustrations, pho-
tos and technical data within this manual.
Please retain this manual for your records.
Note
In this document, many screenshots are created by way of example for a display. Please
consider this and replace the product names with the name of your device.

Bosch C 80 Specifications

General

Resolution	16 bit
Interfaces	USB
Measurement Range	±10V
Accuracy	±0.1 % FS
Channels	8 universal analog inputs (±10 V, ±20 mA, Pt100, Pt1000, Thermocouples type K, S, J, T, N, R, B, E), 4 digital inputs (trigger, counter, frequency), 2 digital outputs (24 V / 500 mA)