EasyManuals Logo

Bosch C 80 User Manual

Bosch C 80
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
First Steps | 8
Bosch Motorsport Manual_C_80 19/144
After the reset, RaceCon reconnects to the C 80. Local configuration on both the PC
and C 80 match (indicated by green background and dot). The C 80 is now connected
to RaceCon.
Green background
and dot indicate
matching
configuration
For further information on the color indication, see chapter “Color indication [}26]”.
8.3 Feature activation
Optional software feature packages are available for the C 80
All software feature packages can be purchased prior to delivery or after you have re-
ceived your device.
If you have purchased an optional software feature package, it must be activated be-
fore it becomes operational.
The feature activation status is stored permanently in the device and requires activat-
ing once only.
As the activation key is device specific, a key delivered with one C 80 does not work
on any other C 80.
When purchasing a software feature package, you have to tell Bosch the ECU ID code.
The ECU ID code is device specific and can be found in the ‘features info’ window,
shown in the screenshots below.
If you have not purchased an optional software feature package, the next steps can
be skipped.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bosch C 80 and is the answer not in the manual?

Bosch C 80 Specifications

General IconGeneral
Resolution16 bit
InterfacesUSB
Measurement Range±10V
Accuracy±0.1 % FS
Channels8 universal analog inputs (±10 V, ±20 mA, Pt100, Pt1000, Thermocouples type K, S, J, T, N, R, B, E), 4 digital inputs (trigger, counter, frequency), 2 digital outputs (24 V / 500 mA)

Related product manuals