Lap Trigger | 17
Bosch Motorsport Manual_C_80 123/144
Distance or
Intermediate
Trigger
Enter your
segment time
and distance
Enter your
expected
laptime
For the distance mode, you need to check on an old lap or estimate how long it takes to
travel the segment distance. Please enter those values into input field. The values can also
be copied and pasted to the input field from an excel sheet as a normal text. In the inter-
mediate trigger, you just need to set the expected time the driver takes to reach the seg-
ment trigger.
Note
Please note that the segment time and length is always measured from the start line or
where the main lap trigger is set.
17.7.2 Functionality and channel outputs
Following output channels are generated by the predated laptime function.
Laptrigger_lapdiff_pred_dls Laptime difference between the predated
and the last laptime
Laptrigger_lapsegdiffpred_dls lagseg difference between the last segment
and the predated segment.
Laptrigger_Lapcurrpred_dls Estimated laptime of the current lap, based
on the predated laptime and the predated
segment deviations
The channel Laptrigger_lapdiff_pred_dls is updated as soon as the main lap trigger is re-
ceived. Both other channels are updated as soon as the next segment distance is travelled
or the next intermediate trigger is received.
To Next Page
Loading...
