50
CAN Bus Configuration
Internal | BEG/EMS1 CsM
| 6/4/2010 | ©
Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Motorsport
C 60 CAN Input
Create new CAN channel
Right click on CAN Input of desired bus (CAN1 or CAN2)
Select ‘New CAN Channel’
from menu
Insert name and description of channel
Click ‘OK’
when done
The channel is listed in the data window and a configuration window opens
To Next Page
Loading...
