52
CAN Bus Configuration
Internal | BEG/EMS1 CsM
| 6/4/2010 | ©
Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Motorsport
C 60 CAN Input
Extracting data from CAN bus
channel name
If replacement values
are used, specify time-
out period and raw value
here
Specify ID of the CAN
message here. If
extended IDs (29bit) are
used, check box
If a multiplexer (row
counter) is used, specify
position and value here
Specify data position,
length, and data format
here
To Next Page
Loading...
