Bosch C 60 - Page 66

66
CAN Bus Configuration
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Motorsport
C 60 CAN Output
 Export RaceCon CAN configuration
 Right click on CAN Output of desired bus (CAN1 or CAN2)
 Select ‘Export…’ from menu
 An ‘Export Selection’ window opens. Specify the filename.
 Click ‘OK’ when done