-16-
Accessories and Attachments
Maintenance
▶ Bearings
Bearings which become noisy (due to heavy load or
very abrasive material cutting) should be replaced
at once to avoid overheating and motor failure.
▶ Cleaning
Certain cleaning agents
and solvents damage
plastic parts. Some of these are: gasoline, car bon
tetrachloride, chlorinated cleaning solvents,
ammonia and household detergents that contain
ammonia.
Ventilation openings and switch levers must be kept
clean and free of foreign matter. Do not attempt to
clean by inserting pointed objects through opening.
Periodically remove the blade, clean the upper,
lower guards and the hub area with kerosene and
wipe it dry. Preventive maintenance and properly
operating guard will reduce the probability of an
accident.
▶ Care of Blades
Blades become dull even from cutting regular
lumber. If you find yourself forcing the saw forward
to cut instead of just guiding it through the cut,
chances are the blade is dull or coated with wood
pitch.
When cleaning gum and wood pitch from blade,
remove the battery from the saw and remove the
blade. Remember, blades are designed to cut, so
handle carefully. Wipe the blade with kerosene
or similar solvent to remove the gum and pitch.
Unless you are experienced in sharpening blades,
we recommend you do not try.
The use of any other attachments or acces so ries not specified in this manual may
create a hazard.
Store accessories in a dry and temperate environment to avoid corrosion and deterioration.
Bosch No. Description Included Sold Separately
Accessories
6-1/2" thin kerf 18 tooth carbide blade – ●
6-1/2" thin kerf 24 tooth carbide blade – ●
Attachments
Rip fence – ●
2610953099 Dust port adapter – ●
To Next Page
Loading...
Need help?
General