6 720 808 869 (2014/06) Compress 3000 DW FOO
28 | Appliance status information
Fig. 26 "Set" function
5.7.1 Date - Setting the temperature unit, date, time and
day of the week
Setting the temperature unit
On the 1
st
use, the user must select the temperature unit.
Fig. 27 Selecting the temperature units
▶ Press the „+“ or „-“ key to select the temperature unit.
▶ Confirm the selection by using the „ok“ key.
The year flashes on the display.
Setting the date
▶ Set the year by using the “+” or “-” key.
▶ Confirm by pressing “ok”.
The month flashes on the display.
▶ Set the month using the “+” or “-” key.
▶ Confirm by pressing “ok”.
The date is set and the day flashes on the display.
Setting day of the week and the time
▶ Set the day of the week using the „+“ or „-“ key.
▶ Confirm by pressing “ok”.
The hour flashes on the display.
Fig. 28 Setting the day of the week
Fig. 29 Setting the time
▶ Set the hour by using the “+” or “-” key.
▶ Confirm by pressing “ok“.
Display shows the minute digits flashing.
▶ Set the minutes by using „+“ or „-“ key.
▶ Confirm by pressing “ok“.
5.7.2 Prog - Timetable operating programing
In the "Prog" submenu, you can set the operation period for the
heat pump.
Fig. 30 "Prog" function
The following menus can be called up in the "Prog" submenu:
• "P1" operating time (days 1 to 5)
Days 1,2,3,4, and 5 corresponds to Monday,
Tuesday, Wednesday, Thursday and Friday,
respectively. Days 6 and 7 corresponds to
Saturday and Sunday, respectively.
To Next Page
Loading...
