6 720 808 869 (2014/06)Compress 3000 DW FOO
Display | 43
7Display
7.1 Fault display
Installation, maintenance and repairs may only be carried out by an authorised contractor. The following table lists the fault codes.
Display Description Solution
E01 Fault in the top storage tank temperature sensor ▶ Notify authorised contractor
E02 Fault in the bottom storage tank temperature sensor ▶ Notify authorised contractor
E03 Fault in the temperature sensor at the air inlet ▶ Notify authorised contractor
E05 Fault in the temperature sensor at the evaporator fins ▶ Notify authorised contractor
E09 Incorrect system purging
Water pump blocked (water not recirculating)
Hydraulic circuit blocked (water not recirculating)
System unpurged due to water shortage
▶ Notify authorised contractor
▶ Reset the system
E10 Heating element faulty
Fault in the high limit safety cut-out
▶ Notify authorised contractor
E11 Fault in the fan
Leak in refrigerant circuit
Fault in the compressor
Fault in the expansion valve
Fault in the dry filter
▶ Reset the system and notify authorised contractor
E13 Fault in the positioning of top storage tank temperature
sensor
▶ Notify authorised contractor
E14 Fault in the fan
Air flow blockage
▶ Notify authorised contractor
Table 8 Fault codes
To Next Page
Loading...
