6 720 808 869 (2014/06) Compress 3000 DW FOO
36 | Appliance status information
5.11 Troubleshooting
This device is equipped with a troubleshooting function. Error
indication is performed by means of a code (Table 8, page 43)
corresponding to the error indication symbol in the digital
display (Fig. 18, [6]). In most cases, the device will only return
to normal functioning following elimination of the cause of the
malfunction and resetting of the device.
To identify the malfunction, see chapter 7.
Fig. 48 Error code
Resetting the system
▶ Press the „ok“ key and hold it down for more than 3
seconds.
Fig. 49 Resetting the system
5.12 Factory configurations
Upon setting the temperature units and timetable, the device
will operate according to the factory set values:
• Manual functioning: „manual“ ( section 5.3)
•Set point: 56°C
• Legionella: Week day 6 and Time 00:00
•PLUS: ON
• Noise reduction mode: Disable
Fig. 50 Initial menu
To Next Page
Loading...
