Bosch Compress 3000 DW FOO - Fset Function - Factory Resetting; Info - Information; Sft - Software Version

6 720 808 869 (2014/06) Compress 3000 DW FOO
34 | Appliance status information
5.7.7 „Fset“ function - factory resetting
„Fset“ function can be used to restore the original factory
settings.
Fig. 43 „Fset“ function
To restore the original factory settings
▶ Access „Fset“ function and press „ok“.
“rset” is displayed.
▶Press „ok“.
After 10 seconds the default settings are restored (
section 5.12).
5.8 „Info“ - information
The „Info“ sub-menu displays the cumulative consumption.
Fig. 44 „Info“ function
Displaying the consumption
▶ Access the „Info“ function and press „ok“.
The cumulative consumption in kWh is displayed.
„reset“ consumption
Display showing the cumulative consumption.
▶ Press „-“.
„del“ indication is displayed.
Fig. 45 „del“ function
▶ Press „ok“.
The meter restarts the count.
5.9 „Sft“ - software version
The „Sft“ sub-menu allows the visualization of the current
software version.
Fig. 46 „Sft“ function
Displaying the software version
▶ Access the „Sft“ sub-menu and press „ok“.
▶ Press “+” and “-” keys to navigate between 4 characters
and 4 digits.
The software version is identified by 4 characters followed
by 4 digits (Ex: HPAF 0836).
6720804054-10.1V
6720646160-36.1V
6720646160-42.1V
6720808869-14.1V