Bosch CR 400 - Working with the Main Menu

6 720 820 871 (2016/12)CR 400 | CW 400 | CW 800
Working with the main menu | 17
5 Working with the main menu
Fig. 3 Menu structure of the main menu
1) Only available without cascade module (e.g. MC400) for
certain types of heat source.
2) Different levels are only available with type of time
program.
3) Only available with a constant heating circuit.
4) Only available if a MB LAN2 communication module or an
appliance electronics with integrated communication
interface (MX 25) is installed.
Main menu Temperature settings
Heat appliance
1)
DHW
Activate emergency DHW reduced
Deactivate emergency Time program
Emerg. op. flow temp. Operating Mode
Heating My DHW time program
Heating max. temperature Reset prog.
DHW Circulation
DHW max. temp. Operating Mode
Heating Start frequency
Temperature settings
2)
My DHW circltn time prog.
Heating Thermal disinfection
Setback Start
Setback threshold Start now
Time program Cancel now
Type of time program Temperature
Activate time program Day
My time program 1 Time of day
Reset prog.
My time program 2
Holiday
Reset prog.
Settings
Language
Start opt. time prog. Time format
Sum./wint. changeover Time of day
Sum./wint. changeover Date format
Summer operation from Date
Operating Mode
3)
Display contrast
DHW Room temp. sen. adj.
Heating once Time correction
Start now Standard display
Cancel now Internet password
4)
Temperature Hybrid system
Holding period Energy:price ratio
Env. factor fuel
Env. factor electricity
6 720 815 238-08.2O