What to do if my Bosch Recording Equipment says 'Invalid time/date'?
If your Bosch Recording Equipment displays an 'Invalid time/date' message, it could be because the date and time haven't been set yet. In this case, set the date and time. It can also happen due to a prolonged power supply loss, so try to avoid voltage failures.
What to do if my Bosch Recording Equipment displays 'System configuration not confirmed'?
If your Bosch Recording Equipment displays 'System configuration not confirmed', it means the system configuration has not been completed. Configure the system completely and confirm.
General| Brand | Bosch |
|---|---|
| Model | CW 400 |
| Category | Controller |
| Language | English |
Provides essential safety guidelines for system operation.
Details product energy efficiency data as per EU regulations.
Outlines the maximum functional scope of the equipment.
Explains the control capabilities for heating circuits and modes.
Visual guide to the user interface controls and their functions.
How to choose which heating circuit is shown on the display.
How to switch between automatic and manual heating modes.
How to activate immediate hot water function outside programmed times.
How to activate emergency heating mode for system protection.
How to revert from emergency operation to normal.
How to manually switch off heating for short periods.
How to manually switch on heating for short periods.
Visual representation of the main menu hierarchy.
Settings for emergency operation and basic heat source control.
Settings for time programs and operating modes for heating.
Adjusting temperatures and thresholds for automatic heating modes.
Selecting between temperature levels or freely adjustable temperatures.
Activating automatic mode with a selected time program.
Choosing which time program (1 or 2) to use.
Manually activating DHW heating outside programmed times.
Tips for energy-efficient operation using automatic mode and time programs.
Tips for efficient domestic hot water heating.
Troubleshooting common "sensed" faults like incorrect temperatures.
To Next Page
