6 720 820 871 (2016/12)CR 400 | CW 400 | CW 800
Getting started | 15
4.6 Activating/deactivating heating/DHW
It is possible to activate and deactivate the heating and the
DHW for certain types of heat source by selecting the heat
source menu item from the main menu. Thus, for example, the
system can be controlled manually before a short-term
absence of a few days without the need to set up a holiday
program. This function is only available if the system is
designed and configured accordingly (e.g. in systems without
cascade module). The activation/deactivation of the heating is
described in Tab. 15. DHW can be operated in the same way.
Operation Outcome
Deactivate the heating
▶ Press the menu key to open the main menu.
▶ Press the selector to open the Heat appliance menu.
▶ Turn the selector to highlight Heating.
▶ Press the selector to select Heating.
▶ Turn and press the selector to deactivate the heating (Off) or to cancel the selection
(On).
The changes are effective immediately.
▶ Press the Back key to close the menu.
Activate heating
▶ Press the menu key to open the main menu.
▶ Press the selector to open the Heat appliance menu.
▶ Turn the selector to highlight Heating.
▶ Press the selector to select Heating.
▶ Turn and press the selector to activate the heating (On) or to cancel the selection
(Off).
The changes are effective immediately.
▶ Press the Back key to close the menu.
Table 10 Getting started – Activating/deactivating heating/DHW
6 720 815 820-62.1O
6 720 815 820-64.1O
To Next Page
Loading...
