Bosch CW 400 - Activating emergency operation; Deactivate emergency operation

6 720 820 871 (2016/12) CR 400 | CW 400 | CW 800
14 | Getting started
4.5 Activating emergency operation
It is possible to activate the emergency operation for certain
types of heat source by selecting the heat source menu item
from the main menu. In emergency operation the heat source
enters the heating mode until the burner has reached the set
flow temperature. A heat supply for heating and DHW is thus
guaranteed in the event of a fault until a contractor has repaired
the heating system.
Operation Outcome
Activating emergency operation
▶ Press the menu key to open the main menu.
▶ Press the selector to open the Heat appliance menu.
▶ Press the selector to select Activate emergency operation.
A pop-up window is displayed which prompts you to activate the emergency
operation.
▶ If Yes is highlighted, press the selector to activate the emergency operation.
The display returns to the Heat appliance menu.
▶ Turn the selector to highlight Emerg. op. flow temp..
▶ Press the selector.
▶ Turn the selector to set the temperature.
▶ Press the selector.
The system operates with the modified settings in emergency operation.
Deactivate emergency operation
▶ Press the menu key to open the main menu.
▶ Press the selector to open the Heat appliance menu.
▶ Press the selector to select Deactivate emergency operation.
A pop-up window is displayed which prompts you to deactivate the emergency
operation.
▶ If Yes is highlighted, press the selector to deactivate the emergency operation.
The system reverts to normal operation.
Table 9 Getting started – Emergency operation
6 720 815 820-94.1O
6 720 815 820-95.1O
6 720 815 820-96.1O