en Cleaning and servicing
62
▶ Liquids must not be spilled on the
appliance plug connection.
▶ Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
WARNING
Risk of burns!
Some parts of the appliance become
very hot.
▶ Never touch hot appliance parts.
▶ Allow hot appliance parts to cool
down before touching.
1. Clean the housing, the high-gloss
surfaces and the control panel with
the enclosed microfibre cloth.
2. Clean the beverage outlet with a
soft, damp cloth after beverages
have been dispensed.
3. Rinse the water tank with fresh,
clean water.
4. If the appliance has not been used
for a long time, e.g. after a holiday,
clean the entire appliance, includ-
ing moving parts such as the brew-
ing unit or water tank.
Note:The appliance will rinse itself
automatically if you switch it on when
it is cold or switch it off after it has
dispensed coffee. The system is
therefore self-cleaning.
15.4 Cleaning the drip tray
and coffee dregs con-
tainer
Clean and empty the drip tray and
coffee dregs container every day to
prevent deposits. Follow the illus-
trated instructions at the beginning of
this manual.
→Fig. 26 - 28
15.5 Cleaning the milk con-
tainer
Clean the milk container regularly for
hygiene reasons. You can clean the
milk container in the dishwasher. Fol-
low the illustrated instructions at the
beginning of this manual.
→Fig. 19 - 22
15.6 Service programmes
Use the service programmes if you
insert or remove a water filter or in
order to clean your appliance thor-
oughly. Your appliance will tell you
when you need to perform a service
programme, e.g. cleaning.
ATTENTION!
Improper cleaning and descaling or a
delay in doing so may damage the
appliance.
▶ Immediately perform the descaling
process in accordance with the in-
structions.
▶ Only put cleaning tablets in the
brew chamber of the brewing unit.
▶ Do not put descaling tablets or
other products in the brew cham-
ber of the brewing unit.
Notes
¡ The display indicates the progress
of the descaling or cleaning pro-
cess.
¡ If your appliance has been locked,
you can only operate it again once
the descaling process has been
carried out.
Tip:In addition to the automatic rins-
ing process, regularly also remove
and clean the brewing unit.
Using the service programmes
1. Select "Care & maintenance".
2. Press "Care & maintenance".
a The display shows a list.
To Next Page
Loading...
Need help?
General