51
CTL636E.. | 07/2014
en
● Remove the milk tube. Dismantle the top
and bottom sections of the beverage outlet�
● Separate the milk tubes, connecting
element and suction pipe�
● Clean the individual parts with a deter-
gent solution and a soft cloth�
● Rinse all parts with clean water and dry
them�
M
All parts of the milk system can also
be put in the dishwasher�
● Put the individual parts back together
again�
● Attach the beverage outlet directly from
the front rmly to the three connections.
● Replace the cover.
Cleaning the milk container
For reasons of hygiene, the milk container
should be cleaned regularly� Only the
individual parts of the lid are suitable for
being cleaned in the dishwasher� Clean the
stainless steel milk container by hand with a
mild detergent�
Cleaning the brewing unit
(see also the Quick reference guide)
In addition to the automatic cleaning
programme, the brewing unit should be
removed regularly for cleaning�
● Open the appliance door�
● Use the mains switch J to switch off
the appliance completely�
● Remove the protective cover of the
brewing unit�
● Remove the coffee grounds container.
● Slide the red latch on the brewing unit all
the way to the left j�
● Press the eject lever right down� The
brewing unit will be released�
● Take hold of the brewing unit by the
recessed grips and carefully remove it�
To Next Page
Loading...
Need help?
General
