EasyManuals Logo

Bosch CTL636E SERIES User Manual

Bosch CTL636E SERIES
Go to English
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
53
CTL636E.. | 07/2014
en
F
Important:
Before starting each service program
(Descale, Clean or Calc’nClean)
remove the brewing unit, clean as
instructed and replace it�
Be careful not to jam the milk tube
when closing the door
After completion of each service
programme, wipe the appliance
immediately with a soft, damp cloth
to remove any residues from the
descaling and cleaning solution� It is
possible for corrosion to form under-
neath such deposits�
New sponge cloths may contain
salts� Salts can cause rust film on
stainless steel and must therefore be
washed out thoroughly before use�
Clean the beverage outlet, milk tubes
and connecting piece thoroughly
F
Specially developed, suitable
descaling and cleaning tablets are
available from retail outlets or from
customer services (see the section
Accessories”)�
Descaling
Takes about 21 minutes�
Touch E
Touch [ Descale ] to select the
programme�
The display indicates the progress
of the programme�
Empty drip trays and replace�
Remove the water lter (if there is one)
and press C
Pour lukewarm water into the empty
water tank up to the “0�5 l” mark and
then dissolve one Bosch descaling tablet
TCZ8002 in it� For the TCZ6002 you
should always dissolve two tablets�
F
If there is not enough descaling solu-
tion in the water tank, you will be asked
to do the following� Refill using uncar-
bonated water and press C again�
Remove the milk tube from the milk
container and x the connecting part to
the right side of the beverage outlet with
the magnet�
Close the appliance door
Place a container with a capacity of
0�5 litre under the beverage outlet�
Put the end of the milk tube into the
container
Press C� The descaling programme will
now run for about 19 minutes�
Remove the container and press C
Rinse the water tank and (if removed)
replace the water lter.
Fill the tank with fresh water up to the
“max” indicator
Replace the water tank and close the door.
Place the container underneath the
beverage outlet again�
Put the end of the milk tube into the
container
Press C� The descaling programme will
now run for about 2 minutes and rinse the
appliance�
Remove the container, empty the drip
trays, replace and close the appliance door
Press C. The appliance has nished
descaling and is ready for use again�
Touch E to exit the program�
Cleaning
Takes about 5 minutes�
Touch E
Touch [ Clean ] to select the programme�
The display indicates the progress
of the programme�
Clean the beverage outlet and replace,
empty the drip trays and replace�
Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again�

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bosch CTL636E SERIES and is the answer not in the manual?

Bosch CTL636E SERIES Specifications

General IconGeneral
BrandBosch
ModelCTL636E SERIES
CategoryCoffee Maker
LanguageEnglish

Related product manuals