6 720 820 871 (2016/12)CR 400 | CW 400 | CW 800
Getting started | 11
Manual operation
Setting a constant room temperature for a limited period of time
▶ Press and hold down the man key until the input field for the duration of manual
operation is displayed.
▶ Turn the selector to set the required duration.
The maximum limited duration for manual operation is approx. 48 hours
(2 days).
▶ Press the selector.
The user interface operates with the modified settings.
If manual operation ends at the set time, the active time program is restored.
Cancelling limited duration for constant room temperature
▶ Set the duration to more than 48 hours (Æ setting a constant room temperature
for a limited period of time).
-or-
▶ To activate automatic mode and then manual operation:
– Activate automatic mode (press auto key).
– Wait a few seconds or press the selector to close the pop-up window.
– Activate manual operation (press man key).
Manual operation is active permanently (constant room temperature for an
unrestricted period of time).
If you require a room temperature for a period of time which deviates from the temperatures set for automatic mode: activate
manual operation and set the required room temperature
Manual operation
▶ Press the man key.
Manual operation is activated. The room temperature that is currently valid is
shown in a pop-up window in the lower part of the display. The time program bar
chart is displayed in bold.
▶ Wait a few seconds or press the selector to close the pop-up window.
▶ Turn the selector to set the required room temperature.
▶ Wait a few seconds or press the selector.
The room temperature that is currently valid is shown in a pop-up window in the
lower part of the display.
The user interface operates with the modified settings.
Operation Outcome
Table 7 Getting started – Room temperature
6 720 815 237-07.1O
6 720 815 237-08.1O
To Next Page
Loading...
