Need help?Do you have a question about the Bosch CC 100 M and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | CC 100 M |
| Category | Controller |
| Language | English |
Details for end users on Stage 4 features and operations.
Features and operations for machine tool builders in Stage 4.
Introduces new machine parameter MP 17 for Stage 4 functionality.
Explains the two write protection switches on the control unit.
Details softkeys for programming workpiece dimensions and positions.
Explains the function of the E axis rotating continuously in modulo mode.
Lists the necessary settings and conditions for using the E axis modulo function.
Details coordinate rotation before zero shift without contour rotation.
Explains coordinate rotation before zero shift with contour rotation.
Discusses coordinate rotation with mirror image and NPV functions.
Explains the TRA function for rotary axes with tangential infeed.
Details the programming syntax and effects of the TRA function.
Outlines the modal operation and programming principles for additive NPV.
Lists the available variable ranges for extended system variables.
Explains program selection via interface signals using the BCD bus.
Explains how encoder monitoring is stopped if the 'Drive on' signal is inactive.
Describes the three terminals now evaluated in the PIC 200.
Explains the significance of different symbol table names for PIC 200.
Explains the activation and function of a second electronic handwheel.
Describes how timing of BCD bus output can be selected.
Explains how machine parameters determine PIC user bit availability.
Describes how defined logic operations set non-retentive markers for simplified messages.
Explains how MP 17 defines the number of keys assigned to NC functions.
Explains deactivation of contour/boring cycles and assignment of customized cycles.
Describes using menus and graphic files as programming aids.
Explains the softkey panel for accessing cycles and menus.
Details programming cycles with or without graphic assistance.
Explains the function of additional absolute disks in the encoder.
To Next Page