@>
BOSCH
Flexible Automation
Description Stage 4 Chapter 1
CC
lOOM
User Manual
System
disk
PlC 200
for
PG4
The system disk contains the symbol tables which, in turn, contain all defined interface signals
between
CC
lOOM
and
PlC
200,
in
Gennan
and
English.
Standard abbreviated designations are defined within the system (e.g. CC lOOM) for these input
and output signals and markers.
This
saves
the user
time
when
aeating
and
documenting a
pfc
program.
The
symbol
tables
can
be
modified or
supplemented
at
any
time.
The
symbol tables
have
tha
following significance:
CC100MDT Symbol table
PlC
for
CC
100= M
in
Gennan
CC100MEN
Symbol table
PlC
for
CC
100= M
in
English
CC100TDT Symbol table
PlC
for
CC
100= T
in
German
CC100TEN Symbol
table
PlC
for
CC
100= T
in
English
The
system
disk for
the
CC
100=
M
has
the
disk number CCPICl
MA
and
the
drawing number 062614
The symbol table
CC100MDT is enclosed as an annex in this software description.
1
-36
To Next Page
Loading...
