@)
BOSCH
Flexible Automation
Description Stage 4 Chapter 2
Function:
1. Activating
the
customized cycles
CC
lOOM
User Manual
The
menus
and
graphic files
can
be
used
as a programming aid
in
group
operating
mode
MACHINE
(MDI mode)
or
in
group operating mode MEMORY (editing programs/cycles).
Menu 1 Menu 2 Menu 3 Menu 4
M;;;-~--5---1
Graphic
1.1
Graphic
2.1
Graphic
3.1
Graphic 4.1 Graphic 5.1
Graphic
1.10 Graphic 2.10 Graphic 3.10 Graphic 4.10 Graphic 5.10
Each menu pennits access to
10
graphic display images which each contain the variables and
infonnation
of
one cycle.
2.
Explanation
of
the
softkey
panel
CYCLES
IN
RAM
I
Softkey
"Cycl
••
ln
RAM"
BORING
ON
I OFF
CONTOUR
ON
I OFF
Softkey displayed
in
reverse video mode: The user has
no
access to the fixed cycles stored in the
r----l
BORING
EPROM
if
softkey and softkay
rc
----I
CONTOUR
are set to
"OFF",
He
has
access to the customized cycles and graphic menus
in
the RAM.
Softkey
not
displayed in reverse video mode: The
user
has access to the contour and boring cycles
and graphic menus storad in
the EPROM, provided softkeys I BORING I and
I
CONTOUR
I are sat to "ON". The cycles are fixed
and
cannot be changed.
Softkey
"BORING/CONTOUR
ON/OFF"
Boring cycles, contour cycles ON:
The
contour and boring cycles and graphic menus are stored
fixed in
the EPROM. They cannot be changed.
Boring and contour cycles
OFF: The contour and boring cycles and graphic menus are not stored
in the
EPROM. No acooss.
3, Programming the
cycle.
The cycles can
be
programmed
with
or
without graphic assistance. The
user
cycles, stored under
G881 to G8B9, operate
mcdally. Programming does
not
automatically lead to traverse move-
ments. Modally acting cycles are
not
executed until the axes have been traversed
to
the reference
point G80 deactivates the cycJes.
Contour cycles 90 - 99 do not act modally.
2-9
To Next Page
Loading...
