6 720 820 871 (2016/12) CR 400 | CW 400 | CW 800
20 | Working with the main menu
Operation Outcome
Set the required room temperature for heating and setback mode/setback threshold in automatic mode
▶ Press the menu key to open the main menu.
▶ Turn the selector to highlight the Heating menu.
▶ Press the selector to open the Heating menu.
▶ If Type of time program is set on Freely adjustable temperature, press the selector
to open the Setback threshold menu.
▶ If two or more heating circuits are installed, turn the selector to highlight Heating
circuit 1, 2, 3 or 4 and press the selector.
▶ Turn and press the selector to set the temperature.
More temperature settings are possible via the time program
(Æ Chapter 5.3.2, page 21).
▶ If Type of time program is set on 2 temperature levels, press the selector to open
the Temperature settings menu.
Note: The time program can only be set using a App on smartphone or a similar terminal
appliance if this setting is selected.
▶ Turn the selector to highlight Heating or Setback.
▶ Press the selector.
▶ Turn the selector to highlight the desired setting for the setback mode.
▶ Press the selector to activate the selected setting.
▶ Turn and press the selector to set the temperature. The limits of the setting values for
the temperatures are determined by the settings for the other operating mode in each
case.
The user interface operates with the modified settings. The settings are applied to all
time programs for the heating system (if two or more heating circuits are installed, it
is only applied in the selected heating circuit).
Table 15 Heating and setback mode/setback threshold for adapting the automatic mode to suit individual preferences
6 720 815 237-20.1O
6 720 815 237-21.1O
6 720 815 237-22.1O
To Next Page
Loading...
