Security System | User's Guide | Part I: Security System Basics - Special System Trouble Display
Bosch Security Systems | 9/04 | 4998122475D 21
Viewing Non-Fire Trouble Events
After pressing COMMAND 4 or the Silence> soft key, press
any numeric key to view the faulted points. Press Next> to
scroll these displays manually if you wish. Events scroll from
oldest to newest.
Special System Trouble Display
These displays appear on all keypads in the system. See
Standard Displays for a description of each system trouble
display. Pressing COMMAND 4 or the Silence> soft key will
silence a system trouble tone, but the System Trouble display
will not clear until the faulted condition is corrected.
Entry Delay Tone and Display
When you enter an armed system through a point
programmed for entry delay, the keypad emits a repeating
warble tone and displays Figure 1 which means AREA 1
WAREHOUSE is in entry delay for three seconds and then
Figure 2 appears reminding you to turn off your security
system.
Figure 1: Area 1 is in entry delay
To Next Page
Loading...
