Security System | User's Guide | Part II: System Commands - Turning the System Off (Disarming)
Bosch Security Systems | 9/04 | 4998122475D 29
Turning the System Off (Disarming)
Entering your personal passcode turns off your security
system. When the system is turned on, you must enter through
a designated entry door to prevent an instant alarm condition.
Opening the door starts entry delay time and the Keypad
emits a pulsing “beep” tone to remind you to turn the system
off. Enter your passcode before the delay time expires and the
system will turn off.
If you enter through the wrong door or fail to disarm before
the entry delay time expires, you will cause an alarm.
If this happens, silence the alarm (by entering your personal
passcode and pressing
ENTER
) and call your security
company to let them know that it is not an emergency
situation.
To Turn Your Security System Off (Disarm)
1. Enter your passcode and press
ENTER
.
2. You must press the
ENTER
key within 8 seconds of
entering your passcode, or the passcode entry will be
invalid.
3. The display returns to idle disarmed text.
To Next Page
Loading...
