Bosch D1260 - Silence Trouble Sounder;Clear Trouble Display (COMMAND + 4); Description; Using COMMAND 4

Security System | User's Guide | Part II: System Commands - Silence Trouble Sounder/Clear Trouble Display (COMMAND + 4)
Bosch Security Systems | 9/04 | 4998122475D 42
Silence Trouble Sounder/Clear Trouble Display
(COMMAND + 4)
Description
Use COMMAND 4 to silence the trouble sounder during
system events. This command also clears system messages
from the display. The *Alarm Silenced* display will continue
to scroll to remind you that cleared events can be seen with
the View Memory function (refer to VIEW MEMORY ?
(COMMAND + 4 + 0) on page 43).
Using COMMAND 4
1. Press the
COMMAND key.
2. The display shows *System
Command*.
3. Press the
4 key.
4. The Keypad sounder is silenced.