Security System | User's Guide | Part II: System Commands - Master Arming all Areas
Bosch Security Systems | 9/04 | 4998122475D 37
Master Arming all Areas
If you prefer, you may use MASTER ARM ?> command in
the Command Menu to initiate this function and allows you to
arm all or selected areas.
Press the Menu> key to enter the Command Menu, then
press Next> repeatedly until you reach the MASTER
ARM?> prompt. Then press the soft key adjacent to
MASTER ARM?>.
Upon entering this menu
selection MASTER ARM
ALL ? is displayed first.
Press Arm> to Master Arm
all areas.
Or press the Next> soft key to view each unarmed area and
optionally arm each one. To arm a selected area, press Next>
until the desired area appears (Area name text along with Arm
Area # ?). Then press Arm>.
When arming individual areas, the keypad will momentarily
display that the area is arming before providing the option to
arm additional disarmed areas.
To Next Page
Loading...
